humber sceptre mk3 (arrows)
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
Well, my dad had a Sceptre running daily for almost 20 years, and we never had to push it. On a couple of occasions snow got the better of it until we loaded up the rear with people jumping up and down and threw some carpet tiles under the wheels.
Lack of heated rear window was always annoying though; my brother and I were constantly wiping it when it misted up. My Hunter is a '76 with the inbuilt elements, and it makes a useful addition indeed. This could be good for my 1971 Sceptre if it ever threatens to get back on the road again....
Lack of heated rear window was always annoying though; my brother and I were constantly wiping it when it misted up. My Hunter is a '76 with the inbuilt elements, and it makes a useful addition indeed. This could be good for my 1971 Sceptre if it ever threatens to get back on the road again....
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
so the carpets, had to buy them as i could'ent get the colour i wanted ....... £164 from classic carpets set includes the two footwell peices and the bits for the bottom of the door cards i thought that was a good deal what do you think ?
You do not have the required permissions to view the files attached to this post.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
just fitted the re veneered centre console..... just a little moor progress.....it's getting colder in the garage now, the old bones are protesting !!!!
You do not have the required permissions to view the files attached to this post.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Still at it....the restoration i mean. Just fitted new needle and jet with the new rocker shafts and it is running like a clock only trouble is a crack has opened up over no2 cylinder so feeling at bit down so looking for a new cylinder head ally one for a hunter or any really any one got a spare one to sell?
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Hi guys & gals. On the final bits now seats should be done by the end of the month. Just painting the last door. New brown fabric draught excluder ordered should be here tomorrow. Doing all the little bits so shoud have an mot all paperwork sent off ready for blazing june.....we hope.. will post some more piccys soon.
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
what happened with the cylinder head in the end?
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Tried to get a head but no luck so tried the rad weld route and as of by magic it worked. Well at the moment its ok should be on the road gor june...... seats permitting!!.. then proper road tests and fingers crossed
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Nearly there.... just a few more snaggy jobs
You do not have the required permissions to view the files attached to this post.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
On target for MOT at the end of the month when (I am told) the seats will be ready, Untill then its a milk crate and up and down the drive........!
You do not have the required permissions to view the files attached to this post.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Just finished the undersealing am now spotty black underseal all over 
You do not have the required permissions to view the files attached to this post.
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
That is looking very clean and tidy..
Any plans to fit wing mirrors, or door mirrors maybe?
Any plans to fit wing mirrors, or door mirrors maybe?
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Hi, Thanks for looking and yes i would like some mirrors but cannot make my mind up which to have . I do have a nice pair of wing mirrors that came off my old cowley but i like door mirrors..... so at this moment in time i am looking at door mirrors alas none i have seen so far seem right. It is possible that i will have to go to an auto jumble ..... i have'nt seen many pics with door mirrors the 1/4 lights may of course be a problem. I still have to do the coach line i keep putting that off 
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
Oh heck, the coachline - how are you going to approach that?
Looking at our bronze Sceptre, a tape stripe was applied under the lacquer(it was a metallic car) - looks quite good. I always fancied having a go with real paint, with one of the Buegler pinstripers you used to see doing the autojumble circuits - I did buy one and it was very good, I used it to pinstripe some veteran car wheels.
Never took it near a car body though!
At the factory, I think they used to do these by hand, which must have been one of the highest skilled jobs on the line.
Door mirrors - later Sceptres/ Hunters tend to have them (approved accessory), and some Rapiers - maybe check out a few photos on-line to see some good examples. Should be enough room to allow the quarter light to open to some extent. Alternatively the clip-on ones being discussed in the Mk1 topic on here at the moment.
Looking at our bronze Sceptre, a tape stripe was applied under the lacquer(it was a metallic car) - looks quite good. I always fancied having a go with real paint, with one of the Buegler pinstripers you used to see doing the autojumble circuits - I did buy one and it was very good, I used it to pinstripe some veteran car wheels.
Never took it near a car body though!
At the factory, I think they used to do these by hand, which must have been one of the highest skilled jobs on the line.
Door mirrors - later Sceptres/ Hunters tend to have them (approved accessory), and some Rapiers - maybe check out a few photos on-line to see some good examples. Should be enough room to allow the quarter light to open to some extent. Alternatively the clip-on ones being discussed in the Mk1 topic on here at the moment.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
had a good look at lots of photos and decided that if i am going to have mirrors then they might as well be in a position where I can see something, so have bought some on ebay (surprise surprise) I think they will fit well .the factory men did do the stripes by hand took the seconds to do each panel, I was at cowley for the launch of the allegro or as it became known the all agro and there was aguy in the paint section with a pot of paint and a brush and seemingly just swished along the body and as if by some magic trick a superb line appeared, he made it look so effortless and simple any one could have done it....... I dont think
. anyway after some thought the tape with three section seems agood idear stick it on pull off the middle bit and fill it in with paint....mmmm maybe .... and then again ???
.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
finished at laast, now the dreaded MOT....... !!
You do not have the required permissions to view the files attached to this post.