Rootes1725cc

I'm am thinking of investing in a Stainless Steel quad exhaust manifold.
I've seen two variations that are off a Sunbeam Rapier Fastback H120, and a Hillman Hunter GLS.
Does anyone know which one actually fits the Humber Sceptre MK2.
Do you know anyone who makes them to order from proper specs?

This is off a Sunbeam Rapier Fastback


This is off the Hillman Hunter GLS


thanks

hunter one doesnt fit.. tried this back in the 90's, that one off the h120 looks a far better bet, as the steering gear gets in the way of the hunter one.. obviously if you have the facilities to cut-shut the hunter one so the pipes come straight down and then go back under the car at the same sort of height as the original sceptre one then that may also be feasible, just bear in mind the carb flange on the hunter is a slightly different thickness too so when you bolt it up make sure its spaced to be same thickness as the carb mounting plate

On ebay now old holbay exhaust its a bit rusty but at 99P woth playing with good luck