Rootes1725cc

Anybody got any ideas how to remove stubborn door hinge mount screws on my Sceptre ?? I,ve had them soaking in WD & Duck oil from the inside of the doors for a while, check straps are dis-connected to get at the screws easier. It looks like the philips heads have been "abused" over the years, but I can still get a snug fit with the impact driver .....just don't want to risk rounding them out. I don't have facility to get an oxy-acet torch on them, only a small blowtorch.
When/if I get them out, anybody supply new ones ....stainless would be nice with allen key heads

Try getting a No 4 pozi screwdriver,not philips, with a hex on the shaft then you can get a spanner on it and that will work,get a helper to push on the screwdriver as you turn the spanner.
this has always worked for me .
I might have some spare screws if you need them.

Should have mentioned wack the screwdriver in to the screw to shock it first and this will help straighten out and chewed up edges.

I had this trouble also,i left the hinges on the car and removed the screws on the door.I remember it was a nightmare,couldn't get the screwdriver on square if i recall.

Oh what a joyous job !! All screws out apart from the last one & the head is now absolutely knackered !! Will have to attempt to drill the head out & then remove the piece of thread that's left. Sceptre511, if you do have some spare screws can you email me on taylor_ad@yahoo.com & we'll communicate from there.
Thanks for all your advice !!