Hi Everyone A few Questions

Post Reply
ventoandgtd
Posts: 3
Joined: Tue Mar 31, 2009 12:32 am

Hi Everyone A few Questions

Post by ventoandgtd » Tue Mar 31, 2009 12:59 am

Hello Everybody, my name is Ryan and I have just brought a mk1 sceptre (CHN 104B - if anybodys knows it maybe) and It needs putting back together...its a runner and is mot'd taxed etc so i use it as my daily drive!! I got it on ebay. I wanted a mk1 because My grandfather brought one new and all we ever used to talk about when on the topic of cars was his Humber Sceptre and what a brilliant car it was. He died 2 years ago. So I thought I should really find one of these great cars to enjoy for myself as my gramp once did.
Basically it needs the interior sorting and i'm keen to put it back to ''as it was'' firstly its already been converted to neg earth.. i really want to get the rev counter working.....been all over the net no such ''green wire'' to simply change over. I have put a feed directly from the distibutor to the old earhting point on the rev counter and then earthed where the positive feed used to go ...but it doesnt work, it does however sit around 1k then as soon as you rev the engine it drops down onto the stop instead of working in the opposite way,, i'm not sure about the inductive pickup, it just seems like a live feed?? anyway I read somewhere that I needed to swap that loop round, but there is no way of any electrical current ever passing through bescause its just a wire in a plastic hoop with no copper contact on??? Any help here will be greatly recieved.

Also was there ever a chrome ring which went around the bottom of the gear stick gaitor?? and has anyone got the correct smiths clock please??



Embarrasing really as im an auto electrician, but i work on new cars!!!!!!

Dave
Site Admin
Posts: 16
Joined: Thu Jan 01, 1970 12:00 am

Re: Hi Everyone A few Questions

Post by Dave » Tue Mar 31, 2009 3:50 pm

Hi Ryan,

The electronic tacho. has only a 12v supply connection, it may be a problem if your car has had the polarity changed.
The measurement is done by the pulses in the lead from the ignition switch to the coil collected by the tacho magnetic loop (a few turns of the ignition cable) on the back of the tacho.
( see http://www.rootes1725cc.info/wsm134/wsm_n/n_35.htm )

Dave

rootesmadnick
Posts: 272
Joined: Fri Feb 01, 2008 7:42 pm
Location: lumbering in a humber somwhere !!
Contact:

Re: Hi Everyone A few Questions

Post by rootesmadnick » Tue Mar 31, 2009 9:51 pm

far as I know, no chrome ring round the bottom of the gearstick, jsut a black gaiter in that central console
I fix things!!

1952bry
Posts: 15
Joined: Sat Nov 11, 2006 12:16 pm
Location: HUDDERSFIELD

Re: Hi Everyone A few Questions

Post by 1952bry » Thu Apr 02, 2009 7:15 pm

HI RYAN,
I HAVE A '65 MK 1 SCEPTRE. I BOUGHT MINE NEARLY 6 YEARS AGO. IT WAS ALSO WIRED FOR NEGATIVE EARTH AND THE REV COUNTER DIDN'T WORK. I CHANGED IT BACK TO POSITIVE EARTH WITHOUT REALLY DOING ANYTHING APART FROM CHANGING THE WIRING ROUND ON THE AMMETER TO SHOW POSITIVE CHARGE. THE REV COUNTER THEN WORKED, BUT DOES SEEM TO BE TEMPREMENTAL. SOMETIMES IT DOESN'T WORK. I HAVE A "NEW" ONE READY TO PUT IN, IT COST ME £25 FROM FERGUSONS(WHITEHAVEN).
AS FOR THE CLOCK, I HAVE HAD ABOUT 4 WHICH EITHER DIDN'T WORK, OR GAVE UP THE GHOST AFTER A WHILE. MY LATEST ONE IS WORKING OKAY(TOUCH WOOD!) AUTOJUMBLES ARE YOUR BEST BET TO FIND ONE, OR YOU COULD TRY FERGUSONS 01946 63482. I COULD LET YOU HAVE ONE OF MINE, NOT WORKING OF COURSE, BUT I BELIEVE YOU CAN CONVERT THEM TO QUARTZ WORKING FOR ABOUT £60. I THINK THE MECHANISM JUST WEARS OUT AFTER 15 OR 20 YEARS!

I HAVE A MANUAL WITH THE WIRING DIAGRAM FOR THE SCEPTRE IF YOU WOULD LIKE ME TO E-MAIL A SCAN OF IT. GIVE ME A RING IF YOU WISH....07974 698682

BEST OF LUCK,

BRYAN ELLIS

Post Reply