humber sceptre mk3 (arrows)
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
Looks excellent, hard work painting all that.
Any news on the vinyl roof yet? Presumably that goes on before the screens go back?
Any news on the vinyl roof yet? Presumably that goes on before the screens go back?
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Yes ..... Glue remover on its way, have the new front screen rubber just waiting for the rear should be here end of aug early sept I will clean off roof and fit vinyl roof and just leave the rear loose , started today to attempt the re colour of the door cards....... Mmmmm? we will see they seem to only do a few browns and not really the browns i would like so am waiting for them to completly dry before commiting,,,,, work in progress as they say, but we are getting there
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
latest progress with the fight between me and the vinyl roof..... I am winning by being carefull and thinking ahead, but three angle corners are still a challenge.
You do not have the required permissions to view the files attached to this post.
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
looks impressive - keep going, and post up some details of the process.
-
sceptictank
- Posts: 77
- Joined: Fri Jun 03, 2011 4:28 pm
Re: humber sceptre mk3 (arrows)
The rapid way in which this rebuild is progressing puts some of us to shame . . . 
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
thanks for the comments, the big problem with theroof is having never done one before it is a big learning curve, I read all I could on the "net" and it seemed doable..... the instructions with the vinyl was to brush the glue on after cleaning and prepping the roof and put glue on the vinyl ,,, let go tacky and the carefully fit to roof!!!!!!! simple,,, however the glue is a powerfull industrial type and on contact grips like **** to a blanket, \this made me think How can I do this without getting myself stuck to the car for ever more !!...what happens with the glue on a brush is it goes lumpy and then that shows through the vinyl and is very hard to loose the lump...I now know the proffesionals spray the glue on and do a small section then work from the front centre section to the rear after the centre is stuck then each side can be glued and stuck down into the gutters and trim off with the good old stanley blade (allways use a new blade) I found the best way to spread the glue was to use a spreader like the ones in a tin of filler brush on a bit and spread with plastic spatula ect then smoothe onto the car working any air bubbles towards the edge. so far so good then the dreaded three angle corner at the rear. best done with the vinyl warm apply the glue on theroof and the vinylallow to tack off and the gently and slowly smooth into place , you do get a feel for the correct place as the vinyle lets you know where it wants to go, I let the glue on the corners go nearly dry and then GENTLY pulled the vinyl into place working down the rea pillar as it goes. dont streach the vinyl as over time it wants to return to it original shape hence the glue nearly dry on the corners, then trim off excess and fit chrome trim stand back and say I DID THAT ..... my finished roof has some minor bleamishes but as a first time job its not bad . it's the only job you cannot practice, if you paint and it goes wrong then rub down and do it again. if you fit wings then you can fiddle them into position. But with the roof it a first time do it and do it good or its £160 down the drain or you pay £350 and have it fitted I did not want that I would like to be able to say I DID ALL OF IT ...... good luck with all your own jobs and maybe someone has now got the urge to do there own roof....... hoppo
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
Interesting stuff, thanks for explaining that. Makes all the difference to have the vinyl in place. My Hunter has Orange paintwork, and it would just be too much without the roof contrasting in black. Jolly useful when you want to stand coffee, beer or tools on the roof, too.
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
bit more progress
You do not have the required permissions to view the files attached to this post.
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
Very smart indeed! Great work going on there.
Your next challenge will be the gold coach line! and it tapers at the ends.....
Your next challenge will be the gold coach line! and it tapers at the ends.....
-
Marco Polo
- Posts: 9
- Joined: Sat Sep 14, 2013 2:44 am
Re: humber sceptre mk3 (arrows)
Inspiring! I have just started stripping mine, beginning with the vinyl roof (not looking pretty under there). I'm giving myself 5 years as there is plenty of rot.
- pmarshal
- Posts: 63
- Joined: Mon Nov 26, 2012 12:54 pm
- Location: Surrey
Re: humber sceptre mk3 (arrows)
Wow that is really impressive, I had a G reg Sceptre back in 1978 and it never looked this good!
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
And now a beautiful heated rear window kit for windows with or without heating elements fron DS Demist £73 post free
It took me a total of three hours to assemble an fix the kit to the glass, see for yourselves I think it looks good.
It took me a total of three hours to assemble an fix the kit to the glass, see for yourselves I think it looks good.
You do not have the required permissions to view the files attached to this post.
-
turbinecol
- Posts: 125
- Joined: Wed May 02, 2007 4:14 pm
- Location: South East England
Re: humber sceptre mk3 (arrows)
Oustanding. Where do the wires disappear to? Into the parcel tray or behind the c pillar trims? Is it really a glass out job?
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Hi. It is a lot easier with the glass out but it can be done insitu jjust very arkward. I bought a new rubber mine was perishedBut the new one seems to be alittle short on the inside cover flap thingy you know when you pull in the rubber to cover the trim ect seems to be just about 1/4 " short still its the only ones available so will now have to do somthing about the grubby head lining maybe spray it with vinyl paint . That seems to work well. It looks like the seats are a bit beyond me so i am having new skins made in america cheaper than having the done in uk even with taxes and post. Will keep you informed as we go along next job is the carpets ..... material on its way.... watch this space more later !!!!
-
hoppo
- Posts: 90
- Joined: Thu Dec 06, 2012 12:17 pm
Re: humber sceptre mk3 (arrows)
Just realise you asked about the wires... i ran a length of cable taped into the loom and it runs over the wheel arch exiting at the top and comes out behind the c post trim along with the earth cable.... the window can be assembled with contacts on either side and pos feed can be top or bottom ... so quite versatile... had mine working quite a few times and you can feel the warmth through the glass....... quite handy when pushing on a cold day .!!!!!