Does anyone know if the Gates # 05-0024 lower radiator hose for the MKII-III will work on a mkI?
-Dana
lower Radiator hose compatibility
-
thowman
- Posts: 79
- Joined: Mon May 24, 2010 9:31 pm
Re: lower Radiator hose compatibility
Dont see any reason why not.
-
rhythmrider
- Posts: 89
- Joined: Mon Sep 02, 2013 6:58 pm
Re: lower Radiator hose compatibility
The only reason I asked, is because the Gates documentation specifically includes mkII and mkIII, but not mkI
-
thowman
- Posts: 79
- Joined: Mon May 24, 2010 9:31 pm
Re: lower Radiator hose compatibility
As far as I know, there is no mechanical differences between the different mks of car, other than the change in capacity in the later ones. Having said that, the radiator and water pump configuration did not change. "I think"
-
rhythmrider
- Posts: 89
- Joined: Mon Sep 02, 2013 6:58 pm
Re: lower Radiator hose compatibility
For those that are interested I found compatible replacement radiator hoses that are a great fit.
The local parts house let me root around in the back and this is what I found.
Dayco #70641 is a good fit for upper hose for all years except the later years that used the "Alpine type" thermostat housing.
(see the thread on thermostat housings)
Need to cut one inch off of one end
And much harder to find because of the two different size ends...
Dayco # 71670 is a good fit for the lower hose (for all engines with cast iron water pumps)
Hopefully this will help someone else save some time.
BTW, I would never buy NOS radiator hoses.
(Too risky with old rubber parts)
The local parts house let me root around in the back and this is what I found.
Dayco #70641 is a good fit for upper hose for all years except the later years that used the "Alpine type" thermostat housing.
(see the thread on thermostat housings)
Need to cut one inch off of one end
And much harder to find because of the two different size ends...
Dayco # 71670 is a good fit for the lower hose (for all engines with cast iron water pumps)
Hopefully this will help someone else save some time.
BTW, I would never buy NOS radiator hoses.
(Too risky with old rubber parts)