overdrive in but not

Post Reply
mao7w
Posts: 12
Joined: Sun Feb 17, 2013 4:30 pm

overdrive in but not

Post by mao7w » Sun Mar 03, 2013 4:42 pm

1964 Sceptre, Just fitted replacement gearbox, with the reverse located over and back towards driver, I'm sure the old one was over to the passenger, Any way Overdrive will engage on all gears, but is reluctant to disengage, and when it does is a bit savage, Also i was sure that overdrive should only engage on 3rd/4th. I did notice that it seems that you can go for 4th, and would easily try to go into reverse. any advice most welcome

thowman
Posts: 79
Joined: Mon May 24, 2010 9:31 pm

Re: overdrive in but not

Post by thowman » Mon Mar 04, 2013 8:46 pm

Reverse is always towards the driver in a right hand drive car.

Overdrive engaging on all gears either means that you don't have the inhibitor switch correctly wired in - or it is faulty. They are simple and cheap to replace and are available from speedy spares.

Overdrives not disengaging, or doing so reluctantly - sounds like the cone clutch material is worn. It needs a rebuild. If you don't want to do it yourself....(I did one, it's not too difficult).

http://www.overdrive-repairs.co.uk/

Cheers

A

sceptictank
Posts: 77
Joined: Fri Jun 03, 2011 4:28 pm

Re: overdrive in but not

Post by sceptictank » Mon Mar 04, 2013 10:46 pm

If you want to strip and rebuild your Overdrive see here:

http://www.restoreandmodify.co.uk/

4th item down on the menu on the left.

:)

Post Reply