Hi Guys,
Just when I was looking forward to taking my '65 Mk1 to a few shows, the steering box has died I think. I heard a few clonks and groans which developed into non-existent communication between the steering wheel and the front wheels. On examining the steering box, the cap at the opposite end to where the steering shaft goes in had parted company with the main body, with 5 shiny ball bearings for company!
Doesn't sound too good does it? I haven't had chance to look further as yet, but can anyone offer any advice, or is it indeed dead?
If so, has anyone got a spare box for sale?
Hope someone can help in some way.
Cheers, Bryan, Huddersfield.
Burman Steering Box
-
sceptictank
- Posts: 77
- Joined: Fri Jun 03, 2011 4:28 pm
Re: Burman Steering Box
Can you explain further . . . Is it the almost oval cap on the top of the box or the square cap on the end of the box that has 'parted company' with the box? What has actually broken - the main body of the box, the cap, or have the locating bolts sheared?
-
1952bry
- Posts: 15
- Joined: Sat Nov 11, 2006 12:16 pm
- Location: HUDDERSFIELD
Re: Burman Steering Box
Hi Again,
Right. It appears that on some, or maybe the later Sceptres(like mine), a telescopic steering shaft is fitted. On the end of the steering box(not on the top as you look at it) in line with the steering column shaft where there is normally fitted a removal cover with shims for adjustment, mine has a plain end with just a metal dust cap, presumably to protect the end bearing. This is what has been pushed out by the end of the steering shaft. It looks like the end bearing has disintegrated allowing the worm drive to move within the steering box instead of turning the rocker shaft as it has nothing to push against for want of a better description.
Other than that it doesn't appear to have suffered any more damage. I guess I will have to remove it from the car and see if I can fit another bearing?
Any more comments/ideas would be greatly appreciated!
Cheers,
Bryan.
Right. It appears that on some, or maybe the later Sceptres(like mine), a telescopic steering shaft is fitted. On the end of the steering box(not on the top as you look at it) in line with the steering column shaft where there is normally fitted a removal cover with shims for adjustment, mine has a plain end with just a metal dust cap, presumably to protect the end bearing. This is what has been pushed out by the end of the steering shaft. It looks like the end bearing has disintegrated allowing the worm drive to move within the steering box instead of turning the rocker shaft as it has nothing to push against for want of a better description.
Other than that it doesn't appear to have suffered any more damage. I guess I will have to remove it from the car and see if I can fit another bearing?
Any more comments/ideas would be greatly appreciated!
Cheers,
Bryan.