Page 1 of 1
Brake failure.
Posted: Sun Dec 15, 2013 1:27 pm
by oddbal
Hello all! My brake master cylinder is leaking. Its leaking from the actual reservoir that hold the fluid in the engine bay. It must have rusted through.

Where can I find a replacement? Or do you have a spare one I could buy?
Thanks!

Re: Brake failure.
Posted: Sun Dec 15, 2013 4:41 pm
by nzchevy
Re: Brake failure.
Posted: Mon Dec 16, 2013 9:12 pm
by oddbal
Thank you for the links!
Re: Brake failure.
Posted: Tue Dec 17, 2013 3:51 am
by rhythmrider
If your master cylinder is ok with the exception of the "can" rusting though, you can actually just solder it up.
Any "old school" radiator shop should be able to do it. It looks like a "tin can" and it is!
But if it has rusted through, check to see if it was from the inside or outside.
I only say this because if you are not using silicone based break fluid, the non-silicone brake fluids attract water, so you might have some water inside of your break lines.
This could end up rusting out your brake lines as well...